MIG and synergic Pulsed MIG system with optimized weld programs for both steel and aluminum.
Easy to set up. Select wire diameter, wire type and gas being used, set your wire speed and strike an arc.
Alumination™ technology allows use of extended reach push-pull gun for consistent, versatile and dependable aluminum wire feeding.
Synergic Pulsed MIG “one-knob” control makes Pulsed MIG adjustments easy. Set the wire feed speed control and the system handles the rest (when optimized with an MPa Plus feeder).
MPa: M (MIG), P (Pulse), a (Advanced Arc Control). Advanced arc control enables an improved pulse welding arc. In addition, the units provide a more robust and stable arc at very low arc length, reducing heat input, and providing the ability to weld on a wider range of material thickness.
Wind Tunnel Technology™ protects electrical components and PC boards from contamination.
Fan-On-Demand™ cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled through machine.
SharpArc® changes welding arc characteristics in Pulsed MIG (GMAW-P) welding mode. If a gas is used other than what is listed on the Pulsed MIG welding program chart (page 3), the SharpArc® can be adjusted to help customize your arc to the gas being used.
Lower SharpArc® settings widen the arc cone, increase puddle fluidity and flattens the weld bead.
|Industries Interests||Aerospace |
Heavy Equipment Manufacturing
Boat / Yacht
High Purity Processing
|Input Voltage||460/480 V|
|Input Hz||60 Hz|
|Current Type||CC / CV |
|Rated Output||10-38 V |
|Net Width||14.5 in|
|Net Height||17.25 in|
|Net Length||27.25 in|
|Net Weight||122 lbs|
|Warranty||3 Years |
Miller's True Blue Warranty
Running Gear / Cart (Optional)